If you’ve always dreamed of having your wedding at a picturesque US national park, this is the guide for you. Read on for helpful planning tips and reminders.
From the gorgeous scenery to the history behind your favorite monuments, getting married in one of the country’s 400-plus national parks is a unique and super-personal ceremony or reception idea. But before you jump head first into planning your wedding at a national park, you should know that there are a few logistical barriers you might not run into with a more traditional venue. Here, what they are and tips on how to deal.
1. Figure out the format.
You definitely have a few options here. You could have both the ceremony and reception at a national park or just the ceremony in the park and then a reception elsewhere. If you’re hoping to do everything in one place, many parks have what are called “concessionaires,” or private hotels and resorts on the park grounds. These hotels typically also offer more traditional event services like wedding coordination, on-site catering and equipment rentals. That said, because these venues are located in a national park, you’ll still have to follow regulations for sound amplification and hours, limitations for bar hours and décor restrictions (number four will have more info on this.). If there isn’t a hotel or resort on-site, you’ll have to figure out another option. Maybe the reception is held in a picnic area or nearby pavilion. Our take on that route: This works well for small, casual weddings, but is far more difficult to pull off if you’re looking at guest list of more than 50 people.
Tip: Not to deter you completely, but if you’re just after the natural beauty of the park and not actually set on actually marrying in one, perhaps consider scheduling time to take weddings photos in the park instead of having the entire event there.
2. Apply for a permit.
You’ll more than likely need to apply for a permit in order to host your wedding at a national park. That goes for ceremony-only park weddings too. To apply for one, you’ll have to go through the national park’s permit office. Check out NPS.gov (the official website of the National Park Service) for a listing of all the local park permit offices and their contact info. Also, not all permits are the same; some require you to apply up to a year in advance while others won’t let you apply until two or three weeks before. In other words, you’ll want to do your homework extra early.
Tip: Just like any other wedding venue, national parks have busy seasons too. Some parks won’t even issue permits during busy tourist months, so don’t assume it’s an option until you’ve done your research.
3. Find a secluded spot.
If you have dreams of getting married in front of Old Faithful in the middle of the summer, you might want to rethink your plans. Most, if not all, national parks won’t be able to block off an area in front their most popular tourist attractions due to safety and preservation. Instead, you’ll want to work with the national park to find a secluded spot (one that won’t result in dozens of tourists mulling around in the back of your ceremony). National Park Service public affairs specialist Mike Litterst suggests calling the park’s public affairs office for a list of suggestions. Oftentimes, a park’s point person knows what spots in the park have worked for weddings in the past.
Tip: Don’t underestimate the amount of space you’re going to need. Think of it this way: For a sit-down dinner you should factor 25 to 35 square feet per guest. Even if it’s just the ceremony, you’ll need at least 10 square feet per person and you’ll want to factor in an extra 20 to 30 square feet of space for the altar and bridal party.
4. Make a plan for rentals and décor.
Preserving the environment is one of the National Park Service’s first priorities, and as a result, there are quite a few rental and décor limitations. For example, many parks won’t allow any sort of fixtures or staging that might require stakes or securing any décor to the ground (so things like tents and even shepherd’s hooks lining the aisle would be out). Find out what the restrictions are, then work with your florist and planner to come up with a design that involves alternatives to tents and ceremony arches. For example, event planner Jill Hinchman-Hartnett from A Savvy Event weighed down a ceremony arch in Yosemite with cinder blocks and then hid the blocks with flowers. It can be done, you just have to get creative.
Tip: Take full advantage of your surroundings. Rocks, driftwood or even antlers found in the park can be amazing décor elements. And instead of an arch, use a beautiful tree or even boulder as a way to define the space.
5. Choose a caterer who knows the rules.
Here again, there are restrictions about where and when you can have food and drinks—and it all depends on the individual park. The best way to make sure you’re in the clear, is to organize a package with a concessionaire in the park, whether it’s with the on-site restaurant or hotel. If that’s not an option, or insist on having a different food setup that requires an outside caterer, you’ll probably be limited to picnic areas.
Tip: Wildlife like deer, rabbits, squirrels, birds and bears (yes, bears) come with the territory when you get married in a national park. You’ll have to be extra cautious with where and how you store food and drinks, which might mean storing food in tightly closed containers or in a secure facility.
6. Assess and address the bathroom situation.
You’ll either have to find a spot with easy access to restrooms or you’ll have to rent them (as long as the park allows it). If you’re hosting the entire wedding in the park and it won’t be near the restrooms, you’ll obviously have to rent them. If it’s just the ceremony, your best bet is to let guests know ahead of time that there won’t be bathroom access—then keep the ceremony on the short side.
Tip: Don’t forget to factor in delivery costs if you’re going the rental route. “Bringing in restrooms is possible because these typically run on generators, but to get a company to deliver may exceed the rental cost,” says wedding planner Jill Hinchman-Hartnett of A Savvy Event.
7. Hire a coordinator for setup and breakdown.
If you’re using a concessionaire facility like a hotel or resort, it may have staff available to take care of it for you. Otherwise, because it’s unlikely you’ll be able to leave anything set up overnight, you’ll have to figure out who’ll take care of prep and cleanup. Hire a day-of coordinator with a team, or a cleanup crew, to help take care of those logistics and save you the hassle.
Tip: The logistics involved with a national park wedding aren’t exactly simple. So find and hire wedding vendors who’ve done it before. “My best advice for planning a national park wedding is to look to vendors in the area who are experienced and know the ins and outs of the park,” says wedding planner Laura Stagg of Forevermore Events. Not only will they know which questions to ask and rules to watch for, but they’ll be able to help you come up with and execute creative ideas.